Before programming the motor make sure the limits are depressed on the RTS CMO motor.

STEP 1

Initiate programming by pressing both the Up and Down buttons at the same time until the motor jogs.

STEP 2

Check the direction of operation. Press and hold the Down button and confirm it moves the motor out (the motor will be in momentary function) to change the direction press and hold the Stop button until the motor jogs.

STEP 3
SET UPPER LIMIT

Press and hold the Up button of the remote to move the motor to the desired upper limit position, then release. Release the upper limit button on the motor.

STEP 4
SET LOWER LIMIT

Press and hold the Down of the remote to move the motor to the desired lower limit position, then release. Release the lower limit button on the motor.

STEP 5
USER MODE

Once the desired limits are set, press and hold the Program button on the back of the transmitter until the motor jogs, then release. The motor now operates in maintained fashion.

NOTE:

To change limit settings repeat steps 3 and 4.